Activator for coral glue

Sale
Regular price €2,95

Tax included. Shipping calculated at checkout.

Perfect in combination with Aqua Dragon Sticky Coral Glue

The activator is a curing accelerator for all cyanoacrylate-based superglues. The aerosol from the spray can was designed for rapid curing of large adhesive layers when gluing inactive materials or under otherwise unfavorable processing conditions, such as dry air or cold. The activator is suitable for processing in conjunction with Styrofoam and Styrodur, but also all rigid foams used in model making, such as Arcel, Elapor, Solidpor, Hypodur, Z-Foam, Depron, Selitron, EPO, EPP and EPS.

areas of application

high-viscosity cyanoacrylate adhesives
large adhesive layers
absorbent and porous surfaces
alkaline surfaces (galvanized metal parts, etc.)
low temperatures
low humidity (< 30%)

Application

The recommended processing temperature is +10 °C to +30 °C. Shake the can briefly before use. To achieve a smooth surface, a sufficient spray distance of approx. 30 cm should be maintained. There are two possible uses. Before gluing: Apply the spray to one side, allow it to dry briefly and then apply the superglue to the non-pretreated surface. Then quickly put the parts together and allow the adhesive to harden. After gluing: Spray the adhesive directly and allow it to harden.

Color:
Contents:	200.00 ml

Unique Formula Identifier

UFI: HEJ8-AXPC-9E9Q-6EJ2

Danger

GHS exclamation mark GHS flame

hazard warnings

H222 Extremely flammable aerosol.

H229 Pressurized container: May burst if heated.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

safety instructions

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of the reach of children.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Special marking

EUH066 Repeated exposure may cause skin dryness or cracking.

Hazard-determining components for labeling

Contains: Acetone; Propan-2-one; Propanone.

Safety Data Sheet (SDS)

German

Safety Data Sheet (SDS)

Information on first aid for bonding with superglues

Information on first aid for bonding with superglues

Technical Data Sheet

German

Technical Data Sheet