Filters pollutants quickly and effectively
Ensures optimal water quality
Easy installation
For every marine & freshwater aquarium
| myAQUA 1900 | |
|---|---|
| daily performance | 1900 liters of water |
| Dimensions | approx. 434 mm x 163 mm x 418 mm |
| osmosis water/residual water | Yield approx. 1 : 1 - 1.5 |
| salt retention capacity | up to 99% |
| flow rate | max. 1.32 l/min |
| operating pressure | 1 – 4 bar |
| Usable water temperature | 5 – 38°C |
| electricity consumption | 70 W |
| Tension | 24 V |
| scope of delivery | Water tap, 300 cm hose (supply), 600 cm hose (osmosis & waste water), T-piece 1/2 - 1/2 including valve, wall mount, power supply, TDS/EC measuring device, waste water clamp, water connection 3/4 - 3/8, shut-off valve 1/4 - 1/4 |
| article number | #MA1900 |
myAqua 1900 quickly and effectively filters up to 99% of salts, bacteria and pollutants such as nitrate, phosphate and heavy metals from tap water, making it safe for use in any saltwater and freshwater aquarium.
myAqua 1900 achieves a water yield of up to 1:1 and contains only natural filter materials, without chemical additives.
myAqua 1900 can be connected to standard household water pipes thanks to the accessories supplied.
Note: Built-in protection function
Our myAQUA 1900 has an automatic switch-off function. It interrupts the osmosis water production after 2 hours of continuous operation. The LEDs then light up red. If you want to continue with the osmosis water production, briefly disconnect the device from the power supply. The system will then continue to run normally.

ASSEMBLY


LED lights up permanently white = filter/membrane is fully functional
LED lights up red + 10 beeps = filter/membrane should be replaced

The filters can be easily unscrewed from their anchorage on the osmosis system.

Can be connected to all standard household water pipes.