AutoAqua Smart Stir

AutoAqua Smart Stir is a practical device that helps aquarists to perform accurate water analysis. Water analysis is an important part of a successful aquarium.

For an accurate test, most liquid test kits require mixing or shaking the water sample after adding a reagent. In some cases, it may be necessary to add a drop of reagent at a time, shaking or stirring in between until a color change occurs. This can be time consuming and often results in the addition of reagents without proper mixing in between.

With the Smart Stir, it is no longer necessary to shake the water sample between each step. Simply place the test bottle with the included stir bar into the device, press the button and the Smart Stir will mix the sample as you add the reagents. In addition, the white color of the base allows you to see the color change as it occurs.

Smart Stir has a built-in rechargeable lithium battery that can be easily recharged using the included USB cable when the low battery indicator lights up. To save battery power, Smart Stir will automatically shut off after 5 minutes. DO NOT charge the Smart Stir with a fast charger as this may damage it.
Smart Stir only supports USB 5V charging, but the output of the fast charger is higher than 5V and may damage the board.

Technical data

Charger: USB 5V
Charging time: 120 minutes
Battery life: 8 hours
Dimensions: 70.5 x 70.5 x 59.5 mm
Base diameter: 27 mm
Stirring rod size: 3 x 7 mm

Included in the packaging

Smart Stir Basis
stirring rod
USB charging cable
Iron rod for removing the stirring rod from the container