Gryphon AquaSaw

Gryphon AquaSaw C-40CR

The Gryphon AquaSaw C-40CR band saw with a 37" blade allows for cutting most small and medium sized corals. This corrosion-resistant AquaSaw is designed for use with saltwater and is generally used for cutting corals. It is based on the regular C-40 but has improvements designed to reduce maintenance when the saw is used in a corrosive environment such as saltwater. However, regular cleaning with freshwater is recommended. A vertical clearance of 3.5" (8.9 cm) with the top blade guide removed allows for cutting most small and medium sized corals.

Characteristics

- Simple construction with few moving parts

- Engine has sealed bearings for improved corrosion resistance

- New high-speed motor for the fastest cut on the market

- direct drive

- no belts or pulleys

- Powerful engine on top, away from the water

- A shield has been attached to the bottom of the engine to prevent salt water splashes

- Huge water reservoir under the work surface

- 30.5 cm2 free work surface

- Lower table top guide and new table top guide above the table

- Metal parts are made of stainless steel or hard anodized aluminum with stainless steel band saw, but the saw can use any Gryphon band saw

Technical data

- Model: AquaSaw

- Vertical clearance: 8.9 cm (3.5 ") without top guide

- Motor: 1/3 HP Direct Drive DC Blade Speed: 64 km/h (40 miles per hour)

- Platform area: 30.5 cm2

- Coolant System: Recirculating line or salt water Coolant tank: 25 x 22.7 cm (10 "x 9")

- Tension adjustment: single knob - Blade dimensions: 93.6 cm (37") circumference, 0.05 cm (0.02") wide, 0.35 cm (0.14") deep.

Gryphon AquaSaw C-40CR-XL

- The Premier Shredding Saw XL

This corrosion-resistant AquaSaw XL is designed for use with saltwater and is generally used for cutting coral. It is based on the regular C-40 but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as saltwater. 5.5" (13.9 cm) vertical clearance with the top blade guide removed allows for cutting most small to medium sized coral. Features Simple construction with few moving parts Motor has a sealed bearing for improved corrosion resistance New high speed motor available for fastest cutting Direct drive - no belts or pulleys Powerful motor on top, away from the water Protective shield on the bottom of the motor to ward off saltwater splashes Huge water reservoir under the work surface One square foot of unobstructed work surface Blade guide under the table and new blade guide above the table. Metal parts are stainless steel or hard anodized aluminum Comes with stainless steel blade, but the saw can use any Gryphon blade.

Saw blade approx. 106.3cm circumference, 0.1 cm wide, 0.4 cm deep
Vertical distance 11.43cm with top guide and 14.61cm without top guide