Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system
Jebao ATO 150 refill system

Jebao ATO 150 refill system

  • Sale
  • €69,95
Tax included.

Water level controller for aquariums.

With 42 gph DC12V quiet pump.

discharge head max. 152 centimeters

198 centimeters of soft hose with hose holder.

siphon breaker.

Glass thickness up to 12mm.

Automatic water refill and quiet operation.

Optical sensor with intelligent magnetic holder.

LED light alarm.

Scope of delivery:

Pump x 1, power adapter x 1, sensor and magnet holder x 1, soft hoses x 1, siphon breaker x 1, hose holder x 1;

To install:

Step 1: Mount the sensor on the aquarium/technical tank wall at normal water level, attach the magnet holder to the same position outside the tank wall.

Step 2: Connect the soft hose to the pump fitting. Insert the siphon breaker into the soft hose. Keep the siphon breaker higher than the water level of the reservoir. Use the clamp to fix the soft hose to the tank wall.

Step 3: Connect the DC pump and power supply to the sensor sockets, make sure you connect the correct connector as the socket shows.

Maintenance: If the pump is not working properly, please check the following: Check the cavity of the rotor to make sure the rotor is not broken or blocked. Monthly regular inspection, cleaning the pumps can extend the service life. The power cord of the adapter must be lower than the socket to form a drip ring to prevent water from entering the socket along the power cord.